Statue of Ratnasambhava Buddha with Real Stone Setting

In stock
Export
SKU
HME22328
$57.00
Statue of Ratnasambhava Buddha with Real Stone Setting code: HME22328 Weight : 1.22 Kg(s) size :14x9x5 Cm
Shipping Term :
FOB
Unit Of Measure:
Pcs
Package Weight:
1.22 kgs
Min Order Qty:
10
Max Order Qty:
1
Available Stock:
1
More Information
Product TagsHandmade, Handicraft, Craft, Statue, Buddha, Meditation Buddha, Sitting Buddha, Ratnasambhava Buddha, Ratnasambhava Buddha with Real Stone
Seller Countries: Nepal

Statue of Ratnasambhava Buddha with Real Stone Setting

Weight: 1.22 kg
Size: 14x9x5 cm
Material: Brass and Stone


About the Product

Finishing: Stone Setting

Process: Sand Casting



The process cycle for sand casting consists of six main stages which are explained below
Mold-making -The first step in the sand casting process is to create the mold for the casting. In an expendable mold process this step must be performed for each casting. A sand mold is formed by packing sand into each half of the mold. The sand is packed around the pattern which is a replica of the external shape of the casting. When the pattern is removed the cavity that will form the casting remains. Any internal features of the casting that cannot be formed by the pattern are formed by separate cores which are made of sand prior to the formation of the mold. Further details on mold-making will be described in the next section. The mold-making time includes positioning the pattern packing the sand and removing the pattern. The mold-making time is affected by the size of the part the number of cores and the type of sand mold. If the mold type requires heating or baking time the mold-making time is substantially increased. Also lubrication is often applied to the surfaces of the mold cavity in order to facilitate removal of the casting. The use of a lubricant also improves the flow the metal and can improve the surface finish of the casting. The lubricant that is used is chosen based upon the sand and molten metal temperature.

Clamping - Once the mold has been made it must be prepared for the molten metal to be poured. The surface of the mold cavity is first lubricated to facilitate the removal of the casting. Then the cores are positioned and the mold halves are closed and securely clamped together. It is essential that the mold halves remain securely closed to prevent the loss of any material.
Pouring - The molten metal is maintained at a set temperature in a furnace. After the mold has been clamped the molten metal can be ladled from its holding container in the furnace and poured into the mold. The pouring can be performed manually or by an automated machine. Enough molten metal must be poured to fill the entire cavity and all channels in the mold. The filling time is very short in order to prevent early solidification of any one part of the metal.

Cooling - The molten metal that is poured into the mold will begin to cool and solidify once it enters the cavity. When the entire cavity is filled and the molten metal solidifies the final shape of the casting is formed. The mold can not be opened until the cooling time has elapsed. The desired cooling time can be estimated based upon the wall thickness of the casting and the temperature of the metal. Most of the possible defects that can occur are a result of the solidification process. If some of the molten metal cools too quickly the part may exhibit shrinkage cracks or incomplete sections. Preventative measures can be taken in designing both the part and the mold and will be explored in later sections.

Removal - After the predetermined solidification time has passed the sand mold can simply be broken and the casting removed. This step sometimes called shakeout is typically performed by a vibrating machine that shakes the sand and casting out of the flask. Once removed the casting will likely have some sand and oxide layers adhered to the surface. Shot blasting is sometimes used to remove any remaining sand especially from internal surfaces and reduce the surface roughness.

Trimming - During cooling the material from the channels in the mold solidifies attached to the part. This excess material must be trimmed from the casting either manually via cutting or sawing or using a trimming press. The time required to trim the excess material can be estimated from the size of the casting's envelope. A larger casting will require a longer trimming time. The scrap material that results from this trimming is either discarded or reused in the sand casting process. However the scrap material may need to be reconditioned to the proper chemical composition before it can be combined with non-recycled metal and reused.Ratnasambhava Buddha: Brief DescriptionHe is one of five Tathagatas symbolizing the wisdom of equality (skt. Samatajnana). According to the commentary of Namasangiti the author Ravisri says;
“All the phenomena are devoid of essence lacks true inherent existence and hence is dreamlike or illusion or is empty”.
Thus the knowledge of senselessness of persons and the phenomena is the wisdom of equality: Buddha Ratnasambhava is the personification of this wisdom in Vajrayana Buddhism.
In the extant literature he has rarely described his vows aspirations and activity. He is usually called the Buddha born from a jewel. a Sambhava BuddhaÂ’s body oneÂ’s desire would be fulfilled.IconographyHe is yellow in color. He belongs to the Buddha family of Jewel. He is placed in the stupa facing to the south. He shows varada mudra with his right hand. He holds cintamani jewel in his left hand kept on his lap. He also represents the purified form of the defilement pride. He rides on the horse throne symbolizing that he ferries over the suffering sentient beings with full vigor. He resides in the pure abode of Ratnavati heaven (buddha field).
It is said that when Ratna Sambhava Buddha attained enlightenment golden colored rays emitted from his crown and manifested limitless golden colored bodhisattvas; each one of them carrying jeweled scepters emitting light shining on the southern worlds which were numerous as the sands of the Ganges.
It is said that the sentient beingsÂ’ wish would be fulfilled when one sees the golden colored light. It is also said that by meditating on Ratn

 

Mantra of Ratanasambara

oṃ ra tna saṃ bha va traṃ

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
You may also like